Wet and sticky material screening problem, WINNER will help you solve it
Author: Winner Time: 2022-05-11
WINNER Multi-Frequency Screen-C is specially designed for wet and sticky materials. It adopts large amplitude, high vibration intensity, low vibration frequency and polyurethane anti-blocking hole sieve plate to complete the screening process of wet sticky lump ore. The speed at which lump ore is thrown is 2.72 times greater than that of ordinary vibrating screen. The inertial force generated by ordinary vibrating screen is 3.23 times that of gravity. The inertial force generated by multi-frequency screen of lump ore is 22.85 times that of gravity. The force is 7 times that of ordinary sieves.
The multi-frequency screen-C developed and designed by WINNER can be used in various industries or viscous materials (usually refers to the screening of more than 3mm) with a moisture content of less than 20%, such as: lump ore, coke coke powder, coke dicing, Coal powder, limestone, etc.; it can also be used in the screening of various fine materials (usually refers to the screening of > 1.5mm or more), and the material temperature is < 70 ℃. For example; lime powder after lime kiln, etc.
In a steel plant in Shanxi, the lump ore was transformed. Before the transformation, it was a sieve from another manufacturer, which was seriously blocked, the screening effect was not satisfactory, the environmental protection standard was not up to standard, and the service life of the sieve plate was short. After the transformation into an environmentally friendly multi-frequency screen, the lump ore screening efficiency It has reached more than 88%, high sieving rate, no dust, no material leakage, environmental protection standards, long service life of sieve plates, easy maintenance, and customers are very satisfied!
The picture below is: the sieve before the transformation
After using WINNER Multi-Frequency Sieve-C
Multi-frequency screen-C technical features:
(1) The high-frequency relaxation motion of the screen surface can transmit the acceleration of 50G to the material, which can effectively solve the screening of sticky and wet materials and ensure that the screen holes are not blocked;
(2) The high-reliability eccentric flywheel exciter has large bearing capacity and long service life;
(3) Polyurethane relaxation sieve plate has good wear resistance and excellent physical properties, and has a long service life and good screening effect;
(4) Strong adaptability to coal quality fluctuation and low operating cost;
(5) The high-performance imported connecting spring has good nonlinear characteristics to ensure the horizontal vibration of the floating screen frame, and the floating amplitude can be adjusted reasonably according to the process requirements.
If you are also facing the problem of difficult screening of wet and sticky materials, please call WINNER's technical consultation hotline +86 13373745380!
Prev Article：Electromagnetic Direct Injection Heat Exchange System Helps Scrap Utilization
Next Article: Your good helper—WFPS-XC
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.